My way to apply a screen protector without dust/bubbles.

  • Topic Archived
  1. Boards
  2. PlayStation Vita
  3. My way to apply a screen protector without dust/bubbles.
3 years ago#1
Place - Bathroom.

1st - run the shower on HOT to accumulate moisture and STEAM in the air to drop dust out of the air.(The same steam helps the screen protector to stick with little to no chance of bubbles)

2nd - after steam builds wipe counter off to remove any chance of dust or debris getting on the screen.

3rd - lay the Vita down (on a towel or something soft) and use the proper lens cloth (or similar) to clean it.

4th - apply screen protector. If done rite you should have no bubbles or dust under the screen protector.

Works with any device that has a protector, Phones, Tabs etc...
3 years ago#2
Electronic devices should not be around steam/moist surroundings. Bring Vita in the bathroom after the steam has accumulated and not during. Then apply protector.

Nice job all in all TC!
~,~
"He is a Belmont..I will not suffer that bloodline any longer!"
3 years ago#3
The whole process takes around 5 min or less, moisture in any electrical device is not recommended. That being said I've been using this method for around 6+ years and I have never had any issues.
3 years ago#4
i did it this way to all my mobile devices, 3ds, vita and ipad, with the steam on while applying and never had a problem so far
3 years ago#5
Instructions unclear, got my **** stuck underneath the screen protector.
GMT + 1
PSN = William-Lake
3 years ago#6
VegantoKeens posted...
Instructions unclear, got my **** stuck underneath the screen protector.


mine got stuck in the charge port
PSN:JustArc_/arclouksx
Now playing:Pixel Junk Monsters HD,Divekick.
3 years ago#7
arclouks_x posted...
VegantoKeens posted...
Instructions unclear, got my **** stuck underneath the screen protector.


mine got stuck in the charge port


I finally found out the purpose of the mysterious port.
Hey baby. I noticed you have braces. I have braces, too.
PSN: fuzywuzy
3 years ago#8
I've always done my screen protector installations in a bathroom to varying success, but I also applied my Vita screen protector flawlessly in a library, as well.

The most important part is to have both dry and wet cleaning cloths, and a can of compressed air to blow off light dust immediately prior to installation.
Not removing this until Dr. Dre's Detox album is out. 11/22/08
http://www.abload.de/img/aonp7v.gif http://i.imgur.com/1CGr6lB.png
3 years ago#9
Scotch tape also does wonders to remove stray lint.
Kupo, Kupo, Kupo!!!
3 years ago#10
I got another Hori screen protector, I'm ready to try again.
Last Played: Rayman Origins (9/10)
Now Playing: NCAA Football 2014, StarCraft 2, KZM Beta, Civ V, Sonic Generations, Guacamelee El Diablo's Domain, Spelunky
  1. Boards
  2. PlayStation Vita
  3. My way to apply a screen protector without dust/bubbles.

Report Message

Terms of Use Violations:

Etiquette Issues:

Notes (optional; required for "Other"):
Add user to Ignore List after reporting

Topic Sticky

You are not allowed to request a sticky.

  • Topic Archived