Dai-2-Ji Super Robot Taisen Z Saisei-hen

Hello all, I found these codes on a japanese website which allow you to change pilots/mecha. However the mecha code seems to be very unstable and the Pilot code, if you try to add say, Kamina from Z2.1, the game will freeze when you deploy him.

Copy pasting from SRWG-W. Of course these CWCheat codes are for all the people who want to have fun and play SRW in an entirely new way

Testing the codes are really buggy

Pilot codes: ONLY WORKS ON PSP CFW 6.60 PRO-B10
_C0 Use Enemy Unit
_L 0x2004A3F8 0x10000003
_L 0x2004A420 0x10000003
Enemy Unit sub Restriction off
_L 0x2004ACA4 0x10000003

Activation code
_C0 Pilot/Unit Change Activation
_L 0x2016A298 0x0E200480
_L 0x20001200 0x3C0108DE
_L 0x20001204 0x94226BD4
_L 0x20001208 0x38411000
_L 0x2000120C 0x14200002
_L 0x20001210 0x3C010880
_L 0x20001214 0xAC2411FC
Code above is needed to change your units/Pilots
Unit change
_L 0xD0000001 0x10000018
_L 0x600011FC 0xuuuuuuuu
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000088
_L 0x600011FC 0xwwwwwwww
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000048
_L 0x600011FC 0xyyyyyyyy
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000028
_L 0x600011FC 0xzzzzzzzz
_L 0x00020001 0x00000004
Pilot Change
_L 0xD0000001 0x10000011
_L 0x600011FC 0xuuuuuuuu
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000081
_L 0x600011FC 0xwwwwwwww
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000041
_L 0x600011FC 0xyyyyyyyy
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000021
_L 0x600011FC 0xzzzzzzzz
_L 0x00020001 0x00000008

Guide to change Units. Google translated
uuuuuuuu, wwwwwwww, yyyyyyyy, zzzzzzzz: Replace with Unit list
uuuuuuuu, wwwwwwww, yyyyyyyy, to zzzzzzzz, please always enter a numeric value.
After you open the Unit list , please press the [△] button After displaying the "Mech Abilities" of the unit you want to change.Please enter the following command When you return to the list screen.
Specified in the aircraft uuuuuuuu [START ↑] button
Specified in the aircraft wwwwwwww [START ←] button
Specified in the aircraft yyyyyyyy [START →] button
Zzzzzzzz aircraft specified in the [START ↓] button
Changes will be final and binding after save, and load data again. Please screen "aircraft capacity" of the aircraft is not open to change prior to confirmation. May no longer appear in the list for change can not be used by the original aircraft. Please use the code "enemy aircraft enemy pilot can be used" if that. May affect the progress of the game when you change the aircraft to use this code.

For the pilot change
uuuuuuuu, wwwwwwww, yyyyyyyy, zzzzzzzz:Replace with pilot list
uuuuuuuu, wwwwwwww, yyyyyyyy, to zzzzzzzz, please always enter a numeric value.
After opening the pilot list, please press the [△] button After displaying the "Mech Abilities" of the pilot you want to change, then go back to the Pilot List.
Please enter the appropriate command below
Specified in the pilot uuuuuuuu [SELECT ↑] button
Specified in the pilot wwwwwwww [SELECT ←] button
Specified in the pilot yyyyyyyy [SELECT →] button
Specified in the pilot zzzzzzzz [SELECT ↓] button Will be confirmed after the save, and load data again. By the pilot changes may no longer appear in the list can not be used for originally. Please use the code "enemy aircraft enemy pilot can be used" if that. If you have changed to such an enemy pilot, pilot training because they can not, please use the code "unrestricted pilot training pilot · SUB enemy" if that also. May affect the progress of the game when you change the pilot using this code.

Here's the pilot and unit list codes

http://pastebin.com/nYfBwHms


I'm still testing these codes, any help is welcomed :)

I cant get these to work at all :/
---
official Paptimus Scirocco of the G generation world board!
official Golbez of the dissidia 012 board!

Update: Guide to change Units.
uuuuuuuu, wwwwwwww, yyyyyyyy, zzzzzzzz: Replace with the ]Unit list

Go to Unit List, select the unit you want to change, Press Triangle, now go back to the Unit List and Press the following:
Specified in the aircraft uuuuuuuu [START ↑] button
Specified in the aircraft wwwwwwww [START ←] button
Specified in the aircraft yyyyyyyy [START →] button
Zzzzzzzz aircraft specified in the [START ↓] button
Now you will notice that the unit you selected has changed into the Mech you choose, Also the unit will have 0 HP and EN, DO NOT try to upgrade or add items or view the mech, IT WILL FREEZE THE GAME, Before you can do any of that, go Save the game (Obviously you'd want to make a brand new save before doing this) Once saved, Load the game, and you will notice that the Unit now has HP and EN
Changes, You can now upgrade the unit and even give it items.

The Changes WILL BE PERMANENT so be wise on what mech you want to sacrifice (There goes the Taurus)


For the pilot change, follow the same steps as the Mecha change, remember changes will be permanent once you save and load the game.
Here's the pilot and unit list codes

http://pastebin.com/nYfBwHms


NOTE 1 You MUST have enable Enemy/Sub Enemy code turned on if you are going to use enemy units other wise when you change Units, it will display the unit HP and EN in 0 and your game will Freeze!
NOTE 2
We all love Kamina, and his data is in this game, BUT DO NOT USE HIM, Buggy as hell and the game will freeze or change the pilot into the Boss of that stage
NOTE 3 Some pilots will freeze the game in certain stages, this is mostly trial and error.
NOTE 4 Only works on CFW 6.60 PRO-B10

Also try not to use these codes early in the game due to all those events happening, I suggest you use them in the last 10 stages or last 3

<3 Thanks Jx31

Heres an example:
_C0 Seiohki The Insa
_L 0xD0000001 0x10000018
_L 0x600011FC 0x08E69CCC
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000088
_L 0x600011FC 0x08E69CCC
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000048
_L 0x600011FC 0x08E69CCC
_L 0x00020001 0x00000004
_L 0xD0000001 0x10000028
_L 0x600011FC 0x08E69CCC
_L 0x00020001 0x00000004
_C0 Uther Insalaum
_L 0xD0000001 0x10000011
_L 0x600011FC 0x08E6BBE8
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000081
_L 0x600011FC 0x08E6BBE8
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000041
_L 0x600011FC 0x08E6BBE8
_L 0x00020001 0x00000008
_L 0xD0000001 0x10000021
_L 0x600011FC 0x08E6BBE8
_L 0x00020001 0x00000008

Notice that I replaced the w, y and z values with the values for Uther and Seiohki respectively. When you go into the unit and pilot code list, you will see that there are different values for each character; this is because each value represents a different version of said character/unit which appears in the game. You need to choose just one of the values to put into the code, as you can see with the above example.

Because there are different versions of one character/unit in the game, you will need to test which of the given values will give you the unit and character you want. Once you've got the values you want turn on the "Use Enemy Unit", "Enemy unit sub restriction off" and "Pilot/Unit change activation" codes, along with the pilot and unit codes (for the unit/pilot activation code, use the code Jx31 posted as that is the complete code.). In the intermission menu, top second column where you view all the units and pilots, highlight the unit you want to replace, press square then triangle, press x to go back onto the unit list then on the highlighted unit press select+left/right on the d-pad then press start+left/right. You know the codes have worked when unit icon has been replaced with new unit's icon and the pilots level, whatever it has reached up to that point, will be crossed out. DO NOT press square again after replacing the unit as it will crash the game, immediately exit the unit menu, save your game and reset.

Turn off the unit and pilot codes. When you load your game up again the new unit will be available for use as normal. Enemy characters/units you add will reset to level 1/have all upgrades reset after the end of each stage, they also do not have any seishins. I have found a code to fix the seishin problem but I do not know if there is a way to stop the levels/upgrades from resetting. You will notice in the BGM menu that enemy units which you have added will have Zambot's theme set as their default. You can change this by picking the top option on the first page of the bgm change menu to set all the characters music to default. You cannot change their bgm to anything else apart from their default one. So far the codes seem to be entirely safe but just to be on the safe side do not use the codes until the last few stages in the game. Replacing units with sub-pilots will cause the game to make duplicates of units. Because the change is permanent, its best to make a backup to your save file before using the codes. Be sure to only replace the side characters (Hilde/Taurus, Kittan/King Kittan) as I have yet to see if replacing the main characters of each series will cause problems.

Just ask if you need further help.
---
"Tremble! Bow down to your fear!" - Aleksander Nikolaevich Her