This is a split board - You can return to the Split List for other boards.

Halp? No signal detected.

#11BMANZZSPosted 6/1/2012 9:36:45 AM
Make sure you have the 6 pin pci-e cables plugged into your video card. No display can mean a heap of issues, though it probably is your mobo in some way
---
i5-2500k (@4.3GHz) Hyper 212+ | AsRock z68 Extreme3 | GTX 560 Ti 448 @(820/1980)
CM690 II Adv | G-Skill 2x4GB PC1600 | CM Silent Pro 700W
#12FLAWLESSCROWNS(Topic Creator)Posted 6/1/2012 10:21:16 AM
Ok so apparently the "55" is a Dr. Debug code. Says my memory is not installed.

It is so installed though.
---
http://www.damnlol.com/pics/225/41648574c040cb4ff5fa052369c63dc5.gif
#13Worknofun370Posted 6/1/2012 10:25:01 AM(edited)
From: FLAWLESSCROWNS | Posted: 6/1/2012 1:06:28 PM
It was odd though, upon powering back up the pc began to work then stopped for a moment. 2 seconds later it turned on regularly.


That is really odd. I would make 100% sure that your RAM is properly seated and tight (since it's still giving you a 55 error code).

Something certainly sounds off though. I'm leaning towards either your Motherboard or your PSU.
---
Man would indeed be in a poor way if he had to be restrained by fear of punishment and hope of reward after death. - Albert Einstein
#14FLAWLESSCROWNS(Topic Creator)Posted 6/1/2012 10:46:40 AM(edited)
So I've read some stuff.

Apparently with some ASRock motherboard's requires an updated bios to accept IveBridge CPU's (which mine is). I don't know if this applies to my motherboard, but I'll assume it does as others have met with "error code 55" and this ended up being the culprit.

EDIT: Yeah, that's the issue. Ugh, I should've read the feedback = (.


---
http://www.damnlol.com/pics/225/41648574c040cb4ff5fa052369c63dc5.gif
#15BMANZZSPosted 6/1/2012 10:52:17 AM
Ah makes sense. I didn't realize it was a P67, not a Z77 motherboard
---
i5-2500k (@4.3GHz) Hyper 212+ | AsRock z68 Extreme3 | GTX 560 Ti 448 @(820/1980)
CM690 II Adv | G-Skill 2x4GB PC1600 | CM Silent Pro 700W
#16Worknofun370Posted 6/1/2012 10:53:50 AM
From: FLAWLESSCROWNS | Posted: 6/1/2012 2:46:40 PM
So I've read some stuff.

Apparently with some ASRock motherboard's requires an updated bios to accept IveBridge CPU's (which mine is). I don't know if this applies to my motherboard, but I'll assume it does as others have met with "error code 55" and this ended up being the culprit.



Computers man... always with a gotcha somewhere. :) Glad you were able to figure it out, probably need to jump through a few unhappy hoops to get your BIOS updated... but atleast you'll have a running computer at the end. :)
---
Man would indeed be in a poor way if he had to be restrained by fear of punishment and hope of reward after death. - Albert Einstein
#17FLAWLESSCROWNS(Topic Creator)Posted 6/1/2012 2:52:39 PM
So yeah. I'm going to get an updated BIOS chip in the mail soon.

Thanks again for the help.
---
http://www.damnlol.com/pics/225/41648574c040cb4ff5fa052369c63dc5.gif