This is a split board - You can return to the Split List for other boards.

installed a sapphire 7970 but nothing shows up on my screen at all and...

#11CM_Mojica(Topic Creator)Posted 10/5/2013 1:44:38 PM
inuyasha1031 posted...
If possible, have you set your BIOS to "Legacy Mode"?


Not sure. Not much i can do now since nothing shows up on my monitor. ..
#12RhytenPosted 10/5/2013 1:50:03 PM
You could try another cable or another monitor maybe? Since even your integrated chip doesn't show anything...
---
Antec Neo Eco 620w | Gigabyte Z68XP-UD3P | i5 2500k 3.3 Ghz | EVGA Gtx 570 1280 Mb | 8 Gb DDR 3 1333 Mhz | WD 1 Tb 7200 Rpm SATA 3 | HP 2011x 20" 1600x900
#13TheFeshPincePosted 10/5/2013 1:51:20 PM
Ya. Make sure your HDMI cable is fully plugged in to your monitor.
---
http://i.imgur.com/J0lvB6S.jpg | http://i.imgur.com/DoHj9yA.jpg | http://youtu.be/YXkx-PSwbG4
#14WerdnAndreWPosted 10/5/2013 1:52:07 PM
When you tested the integrated gpu, did you remove the 7970?

Make sure the 4/8 cpu power connector is connected to the motherboard and the 24 pin.
---
Corsair 500r ~ P8Z68-V Pro ~ i5 2500k ~ Hyper 212+ ~ Corsair 2x4gb ~ TX750w v2 ~ 560 Ti ~ F3 1TB ~ Crucial M4 128GB ~ Xonar DG ~ Tt Meka G1 ~ Asus PA248Q
#15CM_Mojica(Topic Creator)Posted 10/5/2013 2:13:01 PM
http://www.imgur.com/c7k5j5I.jpeg

http://www.imgur.com/qYMmHfO.jpeg

http://www.imgur.com/5sbvNDw.jpeg

http://www.imgur.com/7JicTMN.jpeg

http://www.imgur.com/UyhNTZi.jpeg


http://www.imgur.com/saanLlI.jpeg



Here. See for your selves.
#16WerdnAndreWPosted 10/5/2013 2:21:29 PM
Picutres look fine, try clearing the cmos.
---
Corsair 500r ~ P8Z68-V Pro ~ i5 2500k ~ Hyper 212+ ~ Corsair 2x4gb ~ TX750w v2 ~ 560 Ti ~ F3 1TB ~ Crucial M4 128GB ~ Xonar DG ~ Tt Meka G1 ~ Asus PA248Q
#17CM_Mojica(Topic Creator)Posted 10/5/2013 2:23:50 PM
Omg I got the Integrated to work. Yay! Now how do I change the bios or whatever to let me use the new gpu?
#18WerdnAndreWPosted 10/5/2013 2:25:50 PM
The BIOS will set the card as default when it detects a gpu in the slot.
---
Corsair 500r ~ P8Z68-V Pro ~ i5 2500k ~ Hyper 212+ ~ Corsair 2x4gb ~ TX750w v2 ~ 560 Ti ~ F3 1TB ~ Crucial M4 128GB ~ Xonar DG ~ Tt Meka G1 ~ Asus PA248Q
#19CM_Mojica(Topic Creator)Posted 10/5/2013 2:46:52 PM
Oh thank the lord. I fixed it. All I did was re-plug everything and take off 1 card of RAM. Not sure hlw that worked but idc lol. Thanks guys, I appreciate the help.
#20fataliPosted 10/5/2013 3:37:25 PM(edited)
Dude, in those pictures the 2nd memory stick looks like it's not push all the way down, that could be causing your problem every time the PC moves.

The white plastic lever you pull to extract the memory looks moved a little to the right, so the stick may not be seated all the way down on that side.

---
Mystery is the source of all true science.