This is a split board - You can return to the Split List for other boards.

Will g skill ripjaws 2133 work with has well

  • Topic Archived
  1. Boards
  2. PC
  3. Will g skill ripjaws 2133 work with has well
2 years ago#1
I was looking at compatible ram and the g.skill ram is set to 1.6 V where as Intel says it is recommended to go for 1.5. I believe this is guaranteed to work where 1.6 requires o.c I have the maximus vi formula and a i7 4770k

Any help/opinions would be great thank you
---
I5 3570k 4.2 Ghz | 2 Gtx 670 ftw 's sli| 1 TB HDD | 16 GB RAM | corsair TX 750 | Samsung 840 pro 256GB | Asus P8 Z77V - LK | Cooler master HAF Tower
2 years ago#2
these are my exact specs.

http://ca.pcpartpicker.com/p/2rjV0
---
I5 3570k 4.2 Ghz | 2 Gtx 670 ftw 's sli| 1 TB HDD | 16 GB RAM | corsair TX 750 | Samsung 840 pro 256GB | Asus P8 Z77V - LK | Cooler master HAF Tower
2 years ago#3
I got dem sticks, and a haswell

http://pcpartpicker.com/user/Pjlind/saved/30I4

I dont know a ton about computers, but it seems to work fine.
---
i5-4670k | MSI Z87-G41 | G.Skill Ripjaws 2x 4gb DDR3-2133 | 530w 80+ | 1tb Seagate Barracuda | Rosewill BlackHawk
2 years ago#4
I got them for 170 where I work, but pc part picker is showing it can have compatibility issues. Is that just cause it voids the warranty of the CPU if you go past 1.5v on ram?

Sounds like it from what I've read but should still work fine
---
I5 3570k 4.2 Ghz | 2 Gtx 670 ftw 's sli| 1 TB HDD | 16 GB RAM | corsair TX 750 | Samsung 840 pro 256GB | Asus P8 Z77V - LK | Cooler master HAF Tower
2 years ago#5
I believe it would just lower it to what's acceptable if I understand correctly. Isn't that what a bottleneck is, even if ever so slight?
---
i5-4670k | MSI Z87-G41 | G.Skill Ripjaws 2x 4gb DDR3-2133 | 530w 80+ | 1tb Seagate Barracuda | Rosewill BlackHawk
2 years ago#6
I have a new tower set up with the same board, cpu, ram sticks with 1.65v and they do work.
---
Ha! Made you read |TJ07| i5-3570k| Asus p8z77-v| GB GTX 770 4gb sli|16gb Corsair veng| 1TB WD HDx2| 128gb Samsung ssd| XSPC Raystorm RS360 kit|
2 years ago#7
Not 100% sure I've been looking around for a good hour, can't seem to find a definitive answer. Figured I'd ask here cause I trust ya guys here :p. I'm pretty sure if you enable x.m.p on bits it should auto set it to the speed of the ram.
---
I5 3570k 4.2 Ghz | 2 Gtx 670 ftw 's sli| 1 TB HDD | 16 GB RAM | corsair TX 750 | Samsung 840 pro 256GB | Asus P8 Z77V - LK | Cooler master HAF Tower
2 years ago#8
It will work perfectly fine.
---
i7 3930k @ 4.5Ghz | H220 | asrock x79 extreme 9 | 16GB 2133mhz ram | SLI GTX 780 | Samsung 830 256GB SSD | 8TB HDDs | EVGA Supernova 1300 G2 | Fractal design R4
  1. Boards
  2. PC
  3. Will g skill ripjaws 2133 work with has well

Report Message

Terms of Use Violations:

Etiquette Issues:

Notes (optional; required for "Other"):
Add user to Ignore List after reporting

Topic Sticky

You are not allowed to request a sticky.

  • Topic Archived