Question from King_Buick85

Asked: 6 years ago

Pal Wii on NTSC TV?

Hello everyone. How do I make a Pal system work on a NTSC television? I've been hearing about setting it to 480p but I just wanted to make sure if it actually helped.

Any help would be much appreciated, thanks.

Top Voted Answer

From: HGID 5 years ago

European TVs usually go both ways, but US TVs normally only run NTSC.
The Wii would run, but in black and white with a bad image quality.

If you want it to look and run normally, you will need a signal converter.

Rated: +2 / -0

This question has been successfully answered and closed

Submitted Answers

STATUS

Have you tried just plugging it in?
Most digital TVs would probably work just fine with it.
(Note that I don't have any PAL equipment to test with, and I'm definitely no engineer.)

Rated: +0 / -0

Most current TVs in Europe also read from NTSC, so it will be likely also the other way around.

Rated: +0 / -2

You can run it on both TV's, but if your Pal on NTSC, some wierd stuff happens like wierd colours, most newer TV's have a setting were you can change the TV type from NTSC and PAL, this should work

Rated: +1 / -0

Most of the new higher end sets and maybe some older ones can display both resolutions. If you have an older TV you may be out of luck or money for the new one.

Rated: +0 / -0

Respond to this Question

You must be logged in to answer questions. Please use the login form at the top of this page.