hide results

    Recruiting Guide by DTheaterFan

    Version: 2.0 | Updated: 08/11/03 | Search Guide | Bookmark Guide

    Title - NCAA Football 2004 Recruiting Guide
    Platform - PlayStation 2TM
    Version - 2.0
    Author - "DTheaterFan" Greg Necastro
    E-mail - gnecastro@hotmail.com
    Updated - August 11h, 2003
    2003 Greg Necastro. All Rights Reserved.
    Table of Contents
    i.  Legal
    1.  Introduction
    2.  New in 2004
    3.  Getting Started - Ending the Season
    4.  Off Season Schedule
    5.  Players leaving
    5.1  Keeping Underclassmen
    6.  Recruiting
    6.1 Team Overview
    6.2 Recruiting Reports
    6.3 Viewing Reports
    6.3.1.  Quarterbacks
    6.3.2.  Halfbacks
    6.3.3.  Fullbacks
    6.3.4.  Wide Receivers
    6.3.5.  Tight Ends
    6.3.6.  Offensive Linemen - Tackles, Guards, Centers
    6.3.7.  Defensive Ends and Tackles
    6.3.8.  Linebackers
    6.3.9.  Defensive Backs - Cornerbacks, free safeties, strong safteies
    6.3.10.  Kickers and Punters
    6.3.11.  Additional recruit information
    6.4  Making an offer
    6.5  Moving to the next week
    6.6  Commitments
    6.7  Target information
    6.8  Continue recruiting
    6.9  Recruiting recap
    7.  Training
    8.  Cut Players
    9.  Set Depth Chart
    10. Start New Season
    11.  Preseason options
    11.1  Custom schedule
    11.2  Redshirt players
    12  Game on
    i. The legal stuff
    The latest version of this guide can be viewed and downloaded at www.gamefaqs.com.
    It is provided for private use at no cost on the following websites:
    If you have found this guide on any site other than this, please notify me.
    1. Introduction
    Most sports games today offer some sort of franchise mode.  They give the player the
    ability to not just play a season with their favorite team, but to evolve the team
    over multiple seasons.  In the pro games, this involves trading, drafting,
    re-signing, and releasing players.  No matter what sport, the overall concepts are
    the same.
    In the college world, however, taking control of a team presents a completely
    different challenge.  NCAA Football 2004 Dynasty mode is one of the best aspects of
    any sports game.
    This guide has been prepared to help walk you through the off-season process
    of NCAA Football.  It will allow you to navigate through the various menus and
    screens in the game.
    This guide does not provide you with the "answers" and "tricks" to recruiting.  The
    reason is simple.  I don't know.  How do you get those top choices on your team?
    What's the best way to allocate recruiting points?  Beats me.  I've included my opinions
    and observations in this guide, but by no means are they the guarantees to a successful
    recruiting class.  The only answers I can offer is to play the game and go through several
    off-seasons.  Experiment with the off-season mode.  Maybe you will learn the best ways
    to recruit.
    2.  New in 2004
    There have been a handful of changes to the recruiting process in this years
    version.  There's more depth in this year's version and it will take more planning
    to get the full benefit from your recruiting effort.
    Changes in the game:
    *  Menus and screens have been given a cosmetic upgrade.  They look better than
    last year and some have additional information.
    *  Returning Players report has been added.  Now you can view the players on your
    roster that are returning from last season in the recruiting process.  In last
    year's game, you had to exit the recruiting menu to view your roster.
    *  Cost for recruiting players has been increased.  Last year, there were three
    sets of charges to recruit a player depending on the prospects distance from
    your school.  This year, there are five sets of charges.  The two new ones are
    higher costs for players further away.
    *  Recruiting Pitch.  In addition to visiting and calling a prospect, you can now
    specify a particular aspect of your school to try and persuade the prospect to
    sign with your team.
    *  Recruiting points decrease each week.  Every week, you have less total
    recruiting points to use.
    *  Prospect Stats/Comments improve.  The feedback you receive when your are
    actively recruiting a player is better and more useful than last year.
    *  Interest matches your style.  If you have a top rated defense, you will
    see more defensive players interested in your school.  If the majority of your
    offense uses the option, it will be harder to find wide receivers.
    3.  Getting Started - Ending the Season
    After the final bowl game is played and a National Champion is crowned, the
    playing season comes to an end.  But, before the off-season begins, there are
    a few things you can do.
    Immediately after the last game, you may be presented a few options you have to
    address before you can continue.  You may be offered a new contract, a contract
    extension, or fired by the school based on your performance.  If one of these occurs,
    you will have to make a decision before you can proceed.  If you're fired, of course,
    you'll have to find a new team.  Your team may also be invited to join a new
    conference.  Again, it is up to you to decide.  Generally, the idea is you will be
    invited to join a more prestigious conference.  If you win the National Title with Ohio
    State, the MAC is not going to waste time inviting you to their conference.
    After these decisions are made, or if none appear, you will be prompted to start
    the off season.  If you say yes, you will not be able to review any of the past season
    stats and rankings.  So, if you want to see some final numbers, don't move on to off
    season.  Also, if you wish to leave your team before your contract expires, you must do
    it before the off season starts.  You can resign your position by going into the Coach
    Strategy menu and then select your new team.  Leaving before your contract ends will
    cost you one prestige star.  You can start the off season by selecting Play Week from
    the main menu, where you will be prompted to start the off season.
    Once you've taken care of these needs, you can start the off season mode.
    4.  Off Season Schedule
    When the Off season schedule appears, it will look similar to the season schedule.
    Instead of play week, the top choice is Off Season Schedule.  This operates similar to
    the play week option and is what you use to progress through the off season.  Also
    available is a Recruiting Recap option.  This is a report that is created after recruiting
    is complete.  You cannot access it until recruiting is done.
    Select the Off Season Schedule and the next screen will present the 6 steps in the off
    season process.
         1. Players leaving
         2. Recruiting
         3. Training
         4. Cut Players
         5. Set Depth Chart
         6. Start New Season
    To move through the off season, you start with the first item, players leaving, and then
    proceed down the list.  Going to the next step completes the previous steps.  I'll explain
    this better in the next session.
    5.  Players leaving
    Press X on the players leaving option and you will be presented with the guys who are not
    coming back next year.  All your seniors are leaving.  They've used up their eligibility
    and can't play anymore college ball.  Also, some of your top underclassman may be
    considering leaving.
    The screen display should look familiar.  It is very similar to the player screens in the
    regular season.  Also, you will see this format in many of the recruiting screens (explained
    next section).  At the top left it will say "Players leaving".  On the upper left side will
    be the players name, school name, a trophy icon if the player has won one (Heisman, best QB,
    etc.).  On the upper right side will be the players year (Freshman, Sophomore, Junior, Senior),
    position, height and weight.  Below that will be some of the players top stats, if he has any
    worth mentioning.
    In the middle of the screen you will see the school name on the left and positons on the right.
    By default, it will display your school and all positions.  You can use the L1 and R1 buttons
    to view different schools and the L2 and R2 to look at specific positions.
    At the bottom will be a list of the players leaving your school.  You can highlight any
    player and press select to view his career stats.
    5.1  Keeping Underclassmen
    Another new feature in NCAA 2004 is the ability to try and convince your underclassmen to
    stay in school for another year when they are listed on the players leaving report.  As you
    review your players leaving list, you may have some non seniors leaving.  Generally, the
    player who is going to leave school early is one of your top players.  Why would someone
    who gets little playing time or didn't have a good year leave before their senior year?  They
    certainly won't be drafted in the pros.
    So, if you find that you have younger players thinking about leaving, you have a shot at
    getting them to stay.  Highlight the player who is leaving and press the X button to bring
    up the Talk into Staying window.  At the top of this window is an area titled Lean.  This is
    a bar graph representation of the players feeling.  On the left is the word leave.  On the
    right is Stay.  The bar represents the players attitude to leaving school.  The more the bar
    is filled towards stay, the better chance you have of convincing him to play another year.
    Underneath the bar are four options you have available.  If you played NCAA 2003, they will
    look familiar (and you'll see them later as well).  The options are: Visit - Head Coach,
    Visit - Assistant Coach, Call - Head Coach, Call - Assistant Coach.  To perform each activity
    will cost you recruiting points from your week one total; V-HC (32), V-AC (16), C-HC (8),
    C-AC (4).  You can select as many options as you like.  Just remember, your recruiting points
    for week one will be reduced.  The number of points you have will be shown at the bottom of
    the window.  So, you need to use your points wisely.  You don't want to use up all your
    recruiting points on a bunch of players leaving early and then have nothing available for
    new prospects which will put you behind in the recruiting race.
    Once you have selected your options, select the continue option.  You will then get an
    instant answer if the player is staying or going.  You can then continue this process for any
    other underclassmen on you leaving list.
    When you finished reviewing the list of players leaving, you can continue to the recruiting
    phase.  While viewing the players leaving report, press the start button to go forward.  A
    window will pop up giving you three options.  Continue to recruiting, Export Draft Class
    and Continue, and Cancel.  If you continue to recruiting, all the players leaving are removed
    from the rosters and the prospect list is generated.  Export draft class will save your draft
    class onto a memory card that you can later import into Madden 2004.  It is important that if
    you want to use your college players in Madden, you must do it here.  After you select either
    option, those players leaving are removed from the game and cannot be recovered, unless you
    reset the game without saving the dynasty.  Also, you cannot export your draft class to
    Madden 2003.  Only 2004 will work.
    6. Recruiting
    This is the heart of the off season process.  Therefore, it is also the longest process.
    Once you have completed the players leaving section, you will be brought to the Recruiting
    Central screen.  In the middle of the screen is a map of the US with your school's home
    state highlighted.  On the left, you will see your school name and conference.  To the right,
    last seasons record and school prestige.  Right of the map will be some text that reads
    'Week 1 of 5'.  As you progress through the recruiting process, this will change to show what
    week you are in.  There are 5 weeks in the recruiting season.  You can use the d-pad to cycle
    through the states.  At the bottom of the screen, are three additional options; square button
    for help, circle button for team overview, and x button for recruiting reports.  The help
    shows you how to navigate through the screen.  It does not provide gameplay help.
    6.1 Team Overview
    The team overview is a very important screen to understand.  Press and hold the circle
    button and the team overview will appear.  You have to hold the button to view the
    information.  Once you let go, it disappears and you will be back at the previous screen.
    The team overview gives you a good all-in-one overview of your roster.  The overview is a
    large chart of each position and the number of players you have.  Looking down the left
    column, you will see the positions list.  They are; Offense: QB, HB, FB, WR, TE, T, G, C,
    Defense: DE, DT, OLB, MLB, CB, FS, SS, K, P.  (I will assume that you understand football
    shorthand)  Looking at the columns, they are broken down into two areas.  At the left, are
    you returning players.  The column headings will be Rating, FR (Freshman), SO (Sophomore),
    JR (Junior), SR (Senior), and Total.  The Rating is an overall letter grade ranking of
    your players at that position.  The FR, SO, JR, SR columns indicate how many players at each
    position are on your roster and what their grade is.  Remember, the grade relates to
    eligibility.  Seniors have one year left to play.  Freshman are players who you redshirted
    the previous season and have all 4 years of their eligibility.  To the right of the Total
    column, there are three columns related to New Prospects.  There is a checkmark, bulls eye,
    and the last column is labeled needs.  The checkmark indicates how many prospects have
    committed to your team and will be on your roster for next season.  Once a player commits,
    he cannot be removed from the roster during recruiting.  You can cut him later.  The target
    column lists the number of players you have extended offers to.  When you look at this report
    before you start recruiting, both of these columns will be zero.  The last column is the
    most important one on the report.  If there is a number in the needs column, it means you
    do not have enough players at that position.  You must either recruit a player to fill the
    need or you will receive a walk-on at the end of recruiting.  Walk ons are generally lower
    level players.
    Any position that you have a need, that line will be colored red.  If you have targeted a
    player to fill a need, but he hasn't accepted yet, the line will be colored black, but you
    will still see a number in the needs column.  Once a player(s) commits and fills all the
    needs for a position, the number in the needs column will be reduced.  If the needs is
    listed as zero, you do not have to recruit players for that position.  Of course you can, if
    you want, but you will not need to receive a walk on later.
    Needs are broken down like this:
    4 players - WR, CB
    3 players - HB, T, G, DE, OLB, MLB
    2 players - QB, FB, TE, C, DT, FS, SS
    1 player  - P, K
    Looking at the needs, your minimum roster will have 42 players.  The maximum is 55.
    NOTE: Here is a difference between the game and real life.  In the game, if you have a need,
    it must be filled.  For example, if you have 2 HB (need 3) and do not recruit one, you will
    receive a walk on HB that you cannot cut.  In the real world, colleges often recruit players
    and later move them to different positions.  You cannot do this in the game.  If you need a
    HB, you must recruit a HB.  You cannot recruit a safety and convert him to HB (although you
    could do this on the depth chart).  Any needs at the end of recruiting, will be filled with
    uncuttable walk ons.  Later, I'll explain the cut process in more detail.
    At the bottom of the team overview screen, is the Available scholarships number.  You start
    every off season with 25 scholarships you can offer.  When you target a player, he receives
    one of the available scholarships.  If you decide later to stop pursuing him, that scholarship
    is returned to the pool.  Once a player commits, that scholarship is locked and cannot be
    returned.  What this does is limit the number of players you can recruit to 25.  In other
    words, you cannot recruit 50 players and select 25.
    6.2 Recruiting Reports
    Overall, all the recruiting reports have the same format.  The difference is that each report
    filters the information in different ways.  There are six reports you can activate by pressing
    the X button from the Recruiting Central screen.
    [State] Prospects - All the players from a particular state or Canada.  This defaults to
    your teams home state as indicated in the map.  You could switch to any other state by using
    the D-Pad.  Generally, schools recruit better in their home state.  So, the need to look at
    other state reports in the recruiting process isn't very helpful as other reports.
    Current Targets - Lists the players you have extended offers to.  This report is blank until
    you target your first player.  Over time, this report will also show the players who are
    coming to your school and the players you tried to recruit but decided to go elsewhere.
    National Top 100 - The 100 best players in the recruiting class.  These are the 5 star,
    blue chips.
    All Prospects - Every player that can be recruited.
    Interested prospects - Players who have your school in their top 3 choices. These are the
    players you have the best chance at recruiting.
    Returning players - This report lists all the players on your current roster.  This is a
    source of information you may wish to refer to during the recruiting process.
    6.3 Viewing Reports
    Whatever report you use, the information is presented the same way, which makes things very
    easy.  Select any report (except the returning players) and press the x button to view it.
    The screen will look like this.  At the top left will be the report name.  Underneath that
    will be the prospect's name and, below that, their hometown.  If you look at the bottom half
    of the report, you will see a line item highlighted.  It is that prospect's information that
    is being displayed at the top.  If you press up or down on the d-pad, you will see the
    highlight bar move to the next player and the information at the top will change.  Below the
    hometown, there may be a blue EA logo.  This symbolizes that this player is a blue-chip
    prospect and is one of the top 100 recruits in the nation.  All players on the National Top
    100 report will have this icon.  On the top right of the report will be the players position
    and rank.  For example, say that it says QB-5.  That means that this player is the number 5
    ranked quarterback in the recruiting pool.  There are 4 higher ranked quarterback prospects.
    Below the position is the players height and weight.  Below that is his caliber represented
    by stars (1-5).  Blue chips will be 5 star players.  You can filter the report to display
    specific positions by using the L2 and R2 buttons (indicated halfway down on the right side).
    In the middle of the screen at the top will be a white helmet.  This represents that a player
    is not committed to a school.  Eventually, this will change to the team helmet of the school
    the player has committed to.  Also, information will be displayed under the helmet once
    recruiting begins.
    The bottom half of the report will list the prospects available based on the report you
    selected and the position filter setting.  The columns from left to right are: player name,
    position, caliber, and top 3 schools.  The report is sorted on caliber of player,
    starting with the highest ranked players.  The top 3 schools are where the player has the
    highest interest.  These schools can change depending on how the player is recruited during
    the recruiting process.
    If you press the select button, a more detailed report on the highlighted player is displayed.
    On the left side will be the players name, hometown, blue chip icon (if applicable), and
    position and type of player.  On the right side is the position rank, height and weight, and
    caliber.  In the middle of the screen will be specific player stats.  This will change
    depending on the position the player plays.  The next few sections will provide position
    specific detail.
    6.3.1.  Quarterbacks
    Type of player:
    Pocket passer - prefers to sit back and throw and handoff.  Not good with option.
    Scrambler - good for options and rollout passes.
    Balanced - decent with either style.  Not necessarily better at one or the other.
    A QB with (LH) displayed next to the type means he thows with his left hand.
    Stats listed:
    40 time - speed.
    Arm strength - how far he can throw.  Represented as a grade (A, B, C, D)
    Pass accuracy - higher the grade, higher completion percentage.
    Bench - strength related.
    Squat - strength related.
    GPA - intelligence.
    I don't know what specific ratings the stats refer to, but you can get a general idea.  A
    quarterback with a high GPA probably has good awareness skills.
    6.3.2.  Halfbacks
    Type of players:
    Speed - fast, not very powerful
    Power - strong, hard to tackle.  lacks breakaway speed
    Balanced - equal portion of speed and power
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.3.  Fullbacks
    Type of players:
    Blocking - good at leading for the halfback
    Receiving - good at catching passes
    Balanced - stats are fairly equal, no specific strength
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.4.  Wide Receivers
    Type of players:
    Speed - fast, not very powerful
    Possession - holds on to the ball, makes the tough catches
    Balanced - stats are fairly equal, no specific strength
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.5.  Tight Ends
    Type of players:
    Blocking - good at leading for the halfback
    Receiving - good at catching passes
    Balanced - stats are fairly equal, no specific strength
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.6.  Offensive Linemen - Tackles, Guards, Centers
    Type of players:
    It looks like there may be a glitch in the game because I checked every offensive lineman
    in the recruiting class and they were all listed as balanced.
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    GPA - intelligence.
    6.3.7.  Defensive Ends and Tackles
    Type of players:
    Pass rusher - Strong skills at rushing the quarterback.
    Run stopper - Strong skills at stopping the running game.
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    GPA - intelligence.
    6.3.8.  Linebackers
    Type of players:
    Coverage - strong skills in pass coverage.
    Run stopper - strong skills in stopping the run.
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.9.  Defensive Backs - Cornerbacks, free safeties, strong safteies
    Type of players:
    Coverage - strong skills in pass coverage.
    Hard hitter - good strength and tackling skills.
    Stats listed:
    40 time - speed.
    Bench - strength related.
    Squat - strength related.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.10.  Kickers and Punters
    Type of players:
    Clutch - highly accurate.
    Sporadic - occasionally makes bad kicks.
    Stats listed:
    40 time - speed.
    Kick power - kicking distance.  Represented by a letter grade.
    Kick accuracy - kicks the ball where aimed.  Represented by a letter grade.
    Vertical - jumping ability.
    Hands - catch and holds the ball.  Represented by a letter grade.
    GPA - intelligence.
    6.3.11.  Additional recruit information
    In the lower half of the detail report, there is some additional information about the
    player.  At the left is the interest level.  This is the player's desire to play at your
    school.  The levels are very low, low, average, high, and very high.  Naturally, the higher
    level of interest a player has, the better chance you will have of recruiting him.  At the
    right, will be the players top 3 schools.  If your school is listed, you'll have the best
    chance of recruiting this player.  At the same time, just because you school is not listed,
    it doesn't mean you can't convince him to come to your school.
    Below this information is some blank space.  Once you target a player and go through a
    week of recruiting, information will be placed her about the player.  I'll give more detail
    about this a little later.
    6.4  Making an offer
    Now that you've looked at some of the reports and have found some players you would like
    to add to your team, it's time to make an offer.  In general, players with a higher interest
    level are your best chances for success.  Players with an average interest are tough and low
    and very low interest are long shots.
    When you've decided on a player to recruit, you want to highlight him from any of the reports.
    Once the player is highlighted, press the X button to bring up the recruit player window.
    At the top you will see the players name and interest level.  The interest level is
    presented as a bar graph.  The bar fills from left to right, so the further it is filled,
    the more interest the player has in your school.  To the left of the interest bar will be an
    arrow.  This arrow represents the weekly change in the players interest.  In the first week,
    every player will have an <--> arrow.  This means that there was no change in interest.
    As you progress through recruiting, this may change to an up arrow (increased interest) or
     a down arrow (decreased interest).  What I've noticed is that a player's interest increases
    when you make him a target and decreases when he isn't (especially if he has your school in
    his top 3).  This is just a generalization.  If you try to recruit a player with very low
    interest in your school, there may not be any change in his interest level no matter how much
    recruiting you do.
    Below the interest level, there are four recruiting activities: Visit - Head Coach, Visit -
    Assistant Coach, Call - Head Coach, Call - Assistant Coach.  Each of these options cost
    a certain amount of recruiting points.  The points necessary to perform each option are based
    on their importance and the distance the player is from your school.  A visit by the head
    coach costs the most because it can have the most benefit.  Recruiting a player across the
    country costs more points than a local prospect.
    Recruiting a player in your home state costs the least.  The further you move away from your
    state, the more points it will cost.  I don't know the exact determination for when the
    points increase, but I do know there are 5 levels of recruiting point costs.  I would guess
    that the highest point requirements occur when you are recruiting across the country (ex.
    you are Florida and are trying to recruit a player in California).  Here are the point levels:
    Recruit option		Distance	1	2	3	4	5
    Visit - Head Coach			8	16	24	32	40
    Visit - Assistant Coach			4	8	12	16	20
    Call - Head Coach			2	4	6	8	10
    Call - Assistant Coach			1	2	3	4	5
    As you can see, it takes less points for the head coach to visit a player in the same state
    than for him to call a player who is extremely far away.
    Below the recruiting activities is a new feature in 2004, recruiting pitch.  Now, you can
    emphasize specific aspects of your program to a recruit.  There are four pitches to choose
    Program prestige - Use this if you're school have a high prestige rating (4-6 stars).
    Location - A good choice for recruiting local players or a school located in a popular area.
    Playing time - Tells the player that he is going to be on the field right away.
    Coaching style - Good for when the player's position is one of the strengths of your program.
    I had luck with this when I was recruiting defensive players and my previous team was the
    number 1 ranked defense.
    Once you select your recruiting activities and pitch, you can select the continue option
    located below the pitch.  Below that is the withdraw offer option.  Use this if you no longer
    wish to recruit this player.  At the bottom is a line with the number of recruiting points
    you have left for the week.
    Now that you've selected a player, chosen your options, and confirmed you choices by
    selecting continue from the recruit player window, you will return to the report you had
    previously selected.  You will notice a couple of changes.  The background for the player will
    be red and the word target will appear below the white helmet.  Also, on the right side,
    you will see the number of recruiting points allocated to that player.
    That's the process to recruit a player.  You would now repeat this process until you have
    targeted all the players you wish to recruit or used up all your available scholarships or
    recruiting points.  You get new recruiting points every week, so try to use them all up
    each week.  As you target players, you can access the Current Targets report to see all of
    them in one location.  Also, remember to look at the team overview overlay (circle button)
    to make sure you aren't neglecting any positions.
    6.5  Moving to the next week
    Once you have made all your recruiting choices for the week, press the triangle button to
    get back to the Recruiting Central screen (the one with the map).  Press the start button
    to begin the week's recruiting.  An option window will appear with three choices.  Advance
    to next week is the option to select.  This will allow the computer to execute your
    recruiting options and advance to the next week.  The simulate all weeks should only be used
    if you are using CPU assisted recruiting (turn this on from the coach options menu).
    Personally, I've never used CPU recruiting.  The third option is cancel, if you're not ready
    to advance.
    Once you select advance to next week, the computer will process the recruiting plans and
    prospect responses for every team.  If you have any recruiting points or scholarships unused,
    the computer will offer to assist you in your recruiting and use them.  I always say no
    to this option.
    6.6  Commitments
    When the computer is finished, you will see a window titled Week # Commits.  In this window
    will be a list of players that have committed to your school.  They are now part of your
    school and you do not have to spend any more on recruiting them.  Press the X button to
    close the window and continue.
    6.7  Target information
    Now that a week of recruiting has taken place, you can find some feedback on your recruits.
    Press the X button to bring up the report menu and select the current target report.  You
    are now at the report showing all the players you have extended an offer to.  Starting from
    the top you see each player that you are pursing that still haven't made a commitment.  Start
    with the first player and press the select button to bring up the player information screen.
    You will now see some new information.
    Some of the prospects stats may have changed.  If you see a number with a red line through it,
    that means that the previous information was wrong and a new number will be written next to
    the old number.  For example, say a player had a 40 time of 4.40 listed.  After actively
    recruiting a player, your scouts determine that he is actually faster than his time.  The
    4.40 will have a redline through it and the new number (ex. 4.30) will appear.  Stats can
    change for the better or worse.  If there is a green check mark, that means that stat was
    At the bottom of the screen will be comments about the recruit. The comments will have a plus
    or minus sign to indicate if they are good or bad comments.  Many of these comments relate
    to the players stats.  So, from our previous example, there may be a comment that says the
    player is faster than we thought.  There will also be a comment related to the pitch you
    used.  This will let you know if it was successful or not.  For example, if you pitched
    location and there is a comment that the player is not considering your location, then you
    will want to change your pitch.  If your pitch is of interest to the player, you may want
    to emphasize it again.
    There is also an indicator on the right side of the screen that says potential.  If you see
    an up arrow in this area, that means that the player may increase his stats significantly
    while in college.
    Comments only appear for players you are actively recruiting.
    6.8  Continue recruiting
    After you read the comments on a player, you need to decide if you will still try and recruit
    him.  Go to the recruit player window by pressing the start button.  Select your recruiting
    options and pitch if you are still pursing this player or select withdraw offer to stop
    recruiting him and select someone else.
    At the recruit player window, you should notice a change in the interest level indicated by
    either an up or down arrow.  If the arrow points sideways, it means your recruiting effort
    had no effect on the player.  Also, you will see that the number of recruiting points
    available decreases each week (new for 2004).
    Now, you go through the recruiting process again like in week one.  You will start to see
    players who now are identified with helmets from the college they've selected.  These players
    can no longer be recruited.  If you look at the bottom of the current target report, you
    will see which recruits selected your school and which ones went elsewhere.
    Continue the process of recruiting for all five weeks.  Take some time to go through the
    player reports because interest levels will change over the recruiting process.
    6.9  Recruiting recap
    Once the final week of recruiting has been completed, you will see the recruiting recap
    report.  This report will now be available from the main menu for the rest of the off season.
    The top half of this report shows a quick team overview.  On the left is the school name,
    conference, and any title they won last season (national, conference).  On the right side is
    last years record and the school's prestige.  Below this information are the top three
    recruits for the school.  They are listed by name, position, hometown, and prestige.
    The lower half of the report lists the schools in order of their recruiting class (best to
    worst).  The columns are rank, school, then the number of recruits at each of the caliber
    rankings (5,4,3,2,1), and the total recruits.
    This report gives you an idea of which schools got the best talent.  Don't worry too much
    about where you rank.  Also, don't get upset when you get out recruited.  If you win a
    national championship with a 3 star caliber school, you are probably still going to lose
    top prospects to the higher caliber schools and have a lower overall ranking.
    7.  Training
    After you finish looking at the recruiting recap, it's time to move on to training.  From
    this point, the rest of the off season process only takes a few minutes.
    From the off season schedule, select the training option.  This will close out the recruiting
    process (you can't do anything else in recruiting anyway).  The training is all done by the
    computer and there is no input required.  Once you start training you will see a message
    that walk ons are being added to certain schools.  Any school that did not fill all there
    needs will receive walk on players at this point.  Afterwards, the computer calculates the
    results of training.
    You will then be taken to the training report.  The report shows lists all of your players,
    position, the amount the increased or decreased during training (+/-), and their stats.
    The number under the +/- heading refers to the players overall stat change.  Individual
    categories may have changed at different rates.  For each player, you will see an icon that
    represents how much improvement the player made to their overall rating.  There are four
    Most improved - awarded to the one player with the largest increase.
    Breakthrough - overall increase more than 5 points.
    Moderate - increase between 3 and 5 points.
    Minimal - increase of 1 or 2 points.
    You can sort the list by teams and positions to change the views.  I've found that with my
    3 star school, my players increased from 2 - 12 points.  Some of the higher prestige schools
    showed even higher increases.
    8.  Cut Players
    Once your done looking at the training results, select the cut players option from the off
    season schedule.  You will be shown your overall team roster.  It looks just like the roster
    reports that you use during the season.  On the right hand side, you'll see a breakdown of
    players by grade and the total number of players you have.  The maximum roster is 55 players.
    So, if you have less than 55, you do not need to cut anybody and you can move on to the
    next step.  If you have more, you will have to cut players until you have no more than 55.
    My personal philosophy is to cut the lowest overall ranked players, regardless of grade, or
    a senior that has rarely played.  The reason I'll cut a senior over a possibly lower ranked
    underclassman is so that I do not have to worry about replacing him next year.  Here's an
    example.  Let's say I have 4 halfbacks.  My returning starter, a senior with an overall rating
    of 85.  A junior rated at 80, a senior at 70, and a freshman at 65.  I half to keep three.
    My 85 rated senior is my starter, and my 80 rated junior will be his backup.  But, even
    though the other senior is rated higher than the freshman, I will keep the freshman.  Here's
    my logic.  After the season is over, my starting senior is gone, and my junior will become
    the starter.  I'll have the freshman as a backup and I will have to recruit at least one
    halfback to fill the need.  Hopefully, he will be better than the returning freshman.  If I
    cut the freshman, then both seniors will be gone next year and I will have to fill two needs.
    Since I don't intend for the third string to play much anyway, I will cut the 70 rated senior
    and avoid being forced to recruit two halfbacks for next year.
    Keep in mind the minimum requirements from the recruiting process.  You cannot have less
    players at a position than the minimum.  For example, you have to carry 3 halfbacks
    even if your strategy is to pass most of the time and you don't use your halfback that much.
    NOTE:  I've said this every year.  This is a game.  Don't get caught up on loyalty.  If the
    best player to cut is a senior because everyone else is better than him at that position, then
    cut him.  It doesn't matter if he was your starter for the past three years or never played
    a down.  There are no rewards or penalties for cutting players.  This is really noticeable
    if you play with a lower ranked school.  When you have a successful season, you may find
    that your incoming recruits are much better than the players you have.  Fill your team with
    the best players.  Don't get hooked on sentiment.  They're not real people.
    9.  Set Depth Chart
    After you have made any necessary cuts, you have the option to set your depth chart.  I would
    suggest skipping this step for now.  We'll get to this in a moment.
    10.  Start New Season
    Now you're ready to begin the new season.  Select the start new season option and the
    computer will close the off season and set the game up for the new year.  You will be taken
    to the main dynasty menu and you're just about ready to get back on the field.  But first,
    there are a couple of things to take care of.
    11.  Preseason options
    Before the season begins, there is an option on the main menu titled preseason options.
    This gives you a chance to change your schedule and redshirt players.  This can only be done
    before the first game is played.  Once you enter play week and play/simulate one game, this
    option goes away.
    11.1  Custom schedule
    When you select preseason options, you have the choice of going to the custom schedule or
    redshirt players screen.  Select the custom schedule by highlighting the schedule option and
    pressing the X button.
    You are now at the custom schedule screen.  At the top left, you see your team name and your
    strength of schedule, shown as stars.  The more stars, the tougher your schedule.  A tough
    schedule will help you in the rankings and BCS calculation during the season.  The tougher
    you can make your schedule, the better chance you have of being on top of the rankings.  If
    you win, of course.
    At the bottom left of the screen is your locked schedule.  These are your conference and
    traditional games that you cannot change.  This schedule also is the same every year, except
    for home and away designation.
    On the right side are the games you can change.  At the top it says Schedule up to # non-
    conference games.  This is the maximum number of games you can have outside of your locked
    schedule, you can have less.  Below this is a list of all the weeks you do not have a
    locked schedule game and the opponent you currently have scheduled (OPEN means you are not
    playing that week).  To change a game, highlight the week you wish to change and press the
    X button.  A list of all the schools available will appear.  Remember, teams have their own
    schedules and will not be available every week.  Also, any team with a ranking before their
    name is their preseason rank.  They may not be ranked their when your game is actually played.
    Here's a couple of notes on your schedule.  I would avoid the generic 1-AA teams (1-AA North,
    1-AA Southwest, etc.).  If you want to schedule games against 1-AA teams, at least pick some
    of the actual teams (Dartmouth, Western Illinois, etc.).  Any 1-AA team on your schedule is
    considered a weak opponent.  The game does not track records for teams not in the dynasty
    mode.  So, there isn't a possibility that Georgia Southern goes 11-1 and only lost to your
    school and adds strength to your schedule.
    NOTE:  If you added 1-AA at the beginning of your dynasty by replacing other schools, then
    they are considered 1-A opponents and their records are tracked.  Consequently, the school
    they replaced can be scheduled, but will be treated as a 1-AA school.
    Also, you can schedule anybody who is available.  In reality, North Texas wouldn't be able
    to convince Ohio State to come play a game in Denton.  But, if they are available, you can
    schedule any team you want.
    Once you select your schedule, you can use the select button to toggle the home field.  Once
    you have set your schedule, use the start button to confirm your new schedule.  You can change
    your schedule as often as you like before the season starts.
    11.2  Redshirt players
    Your other preseason option is to redshirt players.  Redshirtting means that a player will
    not play in any game for the entire year and save his eligibility.  So, if you redshirt
    a freshman you just recruited, he will sit out the entire season, but next year he will begin
    to play and have four years of eligibility.
    Unlike real college football, you must declare your redshirt players to retain their
    When you select the redshirt players option, you will be taken to the roster menu.  Any player
    who has not previously been redshirted are eligible.  To see who is eligible, look at the
    players grade.  If the letters (RS) appears next to the grade, then that player has already
    been redshirted and cannot be done again.  Any player that does not have an (RS) designation
    can be redshirted by pressing the X button.  A redshirt icon will appear on the screen for
    that player.
    Remember, in the cut process that you have to have a minimum number of players at each
    position.  But, you can redshirt a player even if it puts you below the minimum.   For
    example, say you have 3 quarterbacks, 1 senior and 2 freshman.  Your senior is your starter.
    You can select one of the freshman to redshirt and save his eligibility.  You are also
    hoping you will not need to play all three quarterbacks and you can save a year of playing.
    A note on redshirting.
    It is better to redshirt too many players than not enough.  As I stated before, redshirting
    only counts if you declare the player a redshirt.  Even if a player never plays a down, if
    he is not declared a redshirt, he will not save his eligibility.  (In the NCAA, a player can
    be declared a redshirt after the season if he never played in a game).  During the season,
    you can take a player off of redshirting by placing him on the depth chart.  So, if later you
    need to activate a player, like that third quarterback, you can do so without a problem.
    Once you have made your redshirt selections, press the start button to confirm.  The computer
    will remove this players from your depth chart.  This is why I say to wait to set your
    depth charts.  You can now set your depth charts without having to consider who you want
    to redshirt.  They will be already off the chart.  If you select a redshirted player to add
    to the depth chart, you will be prompted to confirm your selection.  Remember, a player
    cannot be on the depth chart and be redshirted at the same time.
    12.  Game on
    Now that you have set your schedule and declared your redshirts, your ready to start the
    new season.  Go into play week and start playing.  You know what to do from here.

    FAQ Display Options: Printable Version